HOW TO INSTALL

ACTIVA707
HOW TO INSTALL

ACTIVA707 INTERIOR PAINTING SYSTEM Experience the best New Home Syndrome Inhibitor with botanic natural binder of which charcoal pores are not blocked and the upbringing light wave, Activa ingredients.

Theoretical application area based on two coats of clean wall surface: 18L / Approx. 20kg
Roller (water-based application) / Airless (pressure gun)
Storage: 5 years when unopened 1 year when opened
2 hours dry to touch (temperature 20℃ / humidity 60%) / time curing drying (temperature 20℃) Finishing material construction time: after 8 hours / solidified drying (temperature 20℃ / humidity 60%)
Dilution: If necessary, use within 10% of ultrapure water or distilled water (recommended undiluted solution)
※ Never mix tap water.
Water-based matte before final finishing material
Indoor concrete (wall, ceiling, floor) gypsum board, wood, iron, cement mortar, etc.
Water-based, black, matte, liquid composition

EASY TO FOLLOW, CHARCOAL APPLIER DIY

1

DIY Charcoal applier preparations

Water-based paint roller, brush, masking tape, vinyl, hand mixer or whisker, tray, spray gun
2

Preparation work

Cover wiping cloth tray, consent, switch and other parts which don’t need painting.
3

Leave the bucket upside down for 5 minutes and use hand mixer or electronic stirrer to stir it to the bottom for 5 minutes and mix the contents thoroughly.
4

Pour appropriate amount of the mixed contents on the tray.
5

Use tools to apply the spot as planned.

As for narrow spots, use brush to make the work easy.
6

As for broad spots, use roller to paint in alphabet m or w shape once, then after 30 minutes of dry, paint one more time.
7

After application, before it dries, remove tapes. After it dries, if there’s no smudge, no smearing, then all done!
8

After prework for wallpapering, do wallpapering.

The applier never causes any detachment or incomplete adhesion whichever kind of finishing material may be used beneath it.

MIX PEARL TO USE AS FINISHING MATERIALS! (BBQ HOUSE, KARAOKE, COMMERCIAL PLACES, HOTEL AND ETC.) (ZERO-VOC) THE FLOWCHART OF INSTALLATION WHICH LETS YOU FEEL CLEAN FOREST AIR COMING OUT FROM WALL.

An environmentally friendly wall finishing material of which main ingredient is bamboo charcoal carbonated at over 1200℃ of high temperature blocks hazardous substances which comes out from concrete and does harm on human body, and absorbs air pollutants to bring excellent effects and efficacies for New Home Syndrome relief. If installed with wallpaper, this applier is specially purposed to keep indoor air fresh and pleasant as if you walk in the woods. After installing Activa 707, upon this, attach or install finishing materials like wallpaper or paint. Upbringing light energy, Activa707 is emitted in 1m radius from wall to dissolve hazardous substances and make your home clean and green forest all the time.